Vacuum Sintering
Machine
Model : VS 120/3
One station automatic hot press machine in controlled atmosphere of advanced technology
for the production of diamond tools. |
 |
Main Features
- Automatic adjustment, temperature, pressure and sintering time ( increasing time
included.) available with different values.
- Computer with storing possibility 99 programs. - Cooling circuit system extended to all
vital parts of the machine.
- Sintering through graphite or special mould.
- Pressing force increment proportional temperature.
- Hydraulic power pack with pressure control by means of an electronic device.
- Automatic vacuum chamber with gas emission cycle to be programmed and controlled
temperature.
- Automatic two sliding doors allow automatic control of sintering conditions and gas.
- Automatic loading & discharging of sintering clamping mould.
| Technical Data |
| Model No. |
VS120/3 |
| Power Supply |
380V, 50/60Hz |
| (different voltage and frequencies on request) |
| Power consumption |
200KVA |
| Temperature regulation and reading range |
Thermocouple
Pyroscope |
20~1200°C
300~1300°C |
| Compression force adjustment |
from 3,500~80,000Kg |
| Sintering area |
200cm2-8500C |
| Adjustable sintering time |
From 0 to 999min |
| Cooling water pressure |
3~6Bar |
| Cooling water consumption |
Approx., 100litres/min. |
| Vacuum max. |
65mmHg(Torr) |
| Dimensions (indicative) |
Length:1,600mm
Width:1,500mm
Height:1,900mm |
| Weight |
Approx.4,000Kg |
| |
| Note:This technical data may be used only for
guideline of production. DIEX Corp. will reserve the right to introduce any technical
modification to its own machines, also in contract acquired, which is irrevocable decision
are improvement, therefore, any datum given on the catalogue & data sheet has only
indicative value. |
|
