Sintering Machine
Model : SM 50/3
One station automatic hot press machine with advanced technology for the production
of diamond segments in horizontal loading & unloading suitable for various kind of
small quantity production. |
 |
Main Features
- Horizontal loading and unloading system of clamping mould
- Automatic adjustment, temp pressure & sintering time (increasing time included)
available with different values
- Computer with strong 99 programs
- Cooling circuit system extended to all vital parts of machines
- Sintering through graphite moulds or special moulds
- Max. 12 steps sintering condition is available in one program
- Pressure increase is proportional to temp
- Hydraulic power pack with pressure control by an electronic device
| Technical Data |
| Model No. |
SM 50/3 |
| Power Supply |
220/380Volt,3Phases,50/60 Hz |
| Max. power consumption |
55 kVA |
| Max. air consumption |
approx. 20 liters/min |
| Temperature regulation and reading range |
Thermocouple 200 - 1200oC pyroscope 300 - 1300oC |
| Compression force adjustment |
500 ~ 20,000 Kg |
| Sintering area |
70 cm2 - 850oC(Changes according to temp.) |
| Sintering time adjust |
0 ~ 999 min. |
| Cooling water pressure |
3 - 4 bars |
| Cooling water consumption |
Approx. 50 Liter/min. |
| Overall Dimension |
Length 1,400 mm x width 1,400 mm x Height 2,050mm |
| Weight |
Approx. 1,300 Kg |
| |
| Note: This Technical date may used for guideline
of production. DIEX Corp. will reserve the right to introduce any technical modification
to its own machines, also in contract acquired, which is irrevocable decision are
improvement, therefore, any datum given on the catalogue & data sheet has only
indicative value. |
|
