Vertical
Vacuum Sintering Machine
Model : SINDIEX 80/3
Automatic hot press machine with small vacuum chamber in controlled atmosphere with
advanced technology for the production of diamond segments in vertical auto loading &
unloading. |
 |
Main Features
- Vertical loading & unloading system of clamping mould.
- Small vacuum chamber with special design.
- Automatic adjustment, temp, pressure & sintering time (increasing time included)
available with different values
- Computer with storing programs.
- Cooling circuit system extended to all vital parts of machines.
- Sintering through graphite moulds or special moulds.
- Max. 12 steps sintering condition is available in one program.
- Pressure increase is proportional to temp.
- Hydraulic power pack with pressure control by an electronic device.
- Auto small vacuum chamber with special design, with gas emission cycle to be programmed
& controlled temp.
| Technical Data |
| Model No. |
SINDIEX 80/3 |
| Power Supply |
220/380Volt,50/60 Hz |
| Max. power consumption |
80KVA(90,100) |
| Max. air consumption |
20 liters/min |
Temperature regulation and reading range
Thermocouple |
200 - 1200oC
|
| Pyroscope |
300 - 1300oC |
| Compression force adjustment |
3000 ~ 4000 Kg |
| Sintering area |
100cm2 - 850oC
(Changes depend on sintering conditions) |
| Sintering time adjust |
0-999Min |
| Cooling water pressure |
3-4Bars |
| Cooling water Consumption |
Approx. 80 Liters/Min |
| Max. Vacuum |
75mmHg(Torr) |
| Overall dimension |
(W)1,950mm x (L)1,700mm x (H)2,000mm |
| Weight |
Approx. 3,100Kg |
|
| Note : This Technical data may be used for
guideline of production. DIEX Corp. will reserve the right to introduce any technical
modification to its own machines, also in contract acquired, which is irrevocable decision
are improvement, therefore, any datum given on the catalogue & data sheet has only
indicative value. |
|
