AUTO. VOLUMETRIC COLD PRESS FOR WIREBEAD & CORE DRILL
Model : WPD 20
This equipment is the
machine that mould desirable size of segment with equal
weight of powder at equal pressure by volumetric. And in
order to efficient using the machine, both production, it
can produce 2 layer wire bead segment & Laser segment for
Core Drill Bit by replacing mould. And also this machine
is designed to automatically proceed tube feeding, segment
pressing and ejection. |
|
Main Features
- By the using the monitor, you can select the segment size.
- Able to use the stored programming with PLC.
- Able to make multi-layer segments.
- Able to make goods with Laser machine.
- Able to make several segments per 1 time.
- The lifetime of mould can be prolonged by the Mould release system.
- Easy to figure out the working pressure and numbers of segments.
- Easy to pressure setting.
- It can produce 1 layer or multi layer segment by the necessity of user.
- Automatically feeding, coupling & ejection of tube.
- Easy to align the clearance between segment and tube.
| Technical Data
|
| Model No.
|
WPD 20
|
| Power Supply
|
380 V, 50/60 Hz, 3 Phases
|
| (Different
Voltage and Frequencies on request) |
| Max. Power Consumption
|
13 KVA
|
| Compression Force
|
500 - 3,000 KG
|
| Air Supply
|
Hose Size : ¡Ë 8 mm
Air Pressure : 6 - 8 Bar
Consumption : Approx. 40 Liters/Min
|
| Cooling Water Supply
|
Hose Size : 3/4"
Water Pressure : 2 ~ 3 Bar
Consumption : Approx 30 Liters/Min |
| Machine Dimension
|
Lenght : 1,800 mm
WIDTH : 1,150 mm
HEIGHT : 2,250 mm
|
| Hydraulic Unit
|
LENGTH : 900 mm
WIDTH : 670 mm
HEIGHT : 1,100 mm
|
| Weight
|
Approx. 2,000 KG
|
|
|
| Note
:
Performance information may be used only as guide for production
capacity estimation of cold press machine. Variations in matrix
powders can influence positively or negatively up to 20% the
production capacity of cold press machine. |
|
