COMPUTER TENSION MACHINE WITH CONTROLLER
Model : CTMC 1/10
Computerized tension & controlling for circular saw blade possible diameter range is from 100-1000 mm. Control checking side run-out & tensioning at the same spindle using powerful software (TENDIEX) & encoder. |
 |
 |
Main Features
- Adjustable rolling pressure
- Pedal switch rotation control with automatic approaching of pressing rolls.
- Adjustable speed change of pressing roll rotation rotation of pressing rolls.
- The table with a control spindle mounted on precision bearings with different diameter of flanges
- A pneumatic cylinder piston with adjustable unidirectional thrust slide on vertical guide moving together with detecting sensor on horizontal guide.
- Automatic steel core locking system by pneumatic cylinder.
- It consists of bench mounted on precision bearing with precision flange, encoder data
acquisition box, control cabinet, tension rolling machine
- Non contact linear sensor able to check deflection & tension.
- Fully computerized system allows creating & visualizing tension & deviation by real time data
acquisition.
- All technical data of tension & control could be stored on hard disk & print out as report form to make Q.A.
| Technical Data |
| Model No. |
CTMC 1/10 |
| MAX. POWER CONSUMPTION |
4KVA |
ROLL ROTATION SPEED
(ADJUSTABLE & VARIABLE) |
1~10 m/min |
| PRESSURE FORCE (ADJUSTABLE) |
FROM 100 TO 1,400KG |
| STANDARD ROLLERS CAMBER |
40 RADIUS |
| ROLLERS DIAMETER |
95MM |
| TENSIONING BLADE DIAMETER |
100MM to 1,000MM |
CONTROLLING BLADE DIAMETER
(SIDE RUN-OUT & TENSIONING CHECK) |
200MM to 1,000MM |
| AIR CONSUMPTION |
5L/MIN. |
| OVERALL DIMENSION |
1,800MM (L) x 1,000MM (W) x 1,350MM (H) |
| WEIGHT (INDICATIVE) |
APPROX. 900 Kg |
| |
| Note: This Technical date may used only for guideline of production. DIEX Corp. will reserve the right to introduce any technical modification to its own machines, also in contract acquired, which is irrevocable decision are improvement, therefore, any datum given on the catalogue & data sheet has only indicative value. |
|
