MANUAL BRAZING MACHINE
Model : MBG20H
WELDING DEVICE FOR DISCS AND GANG SAW BLADES FORESEEN FOR WORKING IN HORIZONTAL POSITION WITH
ACETYLENE-OXYGEN JET OR WITH HIGH FREQUENCY GENERATOR.
ELECTROWELDED STRUCTURE WITH INTERMEDIATE SHELF.
|
|
Main Features
- ELANK-BEARING SPINDLE OF DIAMETER 16MM, GLIDING ON GROUND PROFILES.
- GROUND LOCKING PADS WITH INTERNAL WATER COOLING. THE UPPER PAD IS TRIGGERED BY A NON SWIVELING PNEUMATICALLY PISTON.
- ADJUSTABLE SEGMENT-CARRYING PAD, MADE OUT OF HEAT RESISTANT MATERIAL.
- PAD-CARRYING TROLLEY MADE OUT OF ALLUMINIUM, MOUNTED ON GROUND SPINDLES AND ADJUSTABLE BY MEANS OF CENTESIMAL SCREW(GUAGE CLOCK).
BUILT-IN LOCKING. TOTAL STROKE 15MM.
- OBLIQUE ADJUSTMENT OF THE TROLLEY, FOR WELDING CONICAL SEGMENTS.
- ADJUSTABLE SILENT-BLOCKS ON FEET.
- ELECTRICAL PANEL WITH BUILT-IN SAFETIES.
| Technical
Data |
| Model NO.
|
MBG20H
|
| Power Supply
|
220/380V, 50/60Hz, 3Phases
|
| Elec. Power
|
28 KVA
|
| Cooling Water
|
Approx. 25Liters/min, 1-3bar
|
| Air Consumption
|
Approx. 40Liters/min, 6bar
|
| Segment
|
LENGTH : From 18 mm To 50 mm
WIDTH : From 5 mm To 25 mm
THICKNESS : From 1.6 mm To 12 mm
|
| Adjustable Brazing Time
|
From 0 sec. To 30 sec.
|
| Adjustable Cooling Time
|
From 0 sec. To 60 sec.
|
| Dimensions
|
LENGTH : 2,050 mm
WIDTH : 1,100 mm
HEIGHT : 1,350 mm
WEIGHT : APPROX 550KG
|
| Option
|
Temp. Control sys. / Generator
|
| Brazing Method
|
Horizontal
|
| Character
|
Manual
|
|
|
| Note
:
This Technical data may be used for guideline of production. DIEX CORP. will reserve the right
to introduce any technical modification to its own machines, also in contract acquired, which is
irrevocable decision are improvement, therefore, any datum given on the catalogue & data sheet
has only indicative value.
|
|
