AUTOMATIC
CORE DRILL BRAZING M/C
Model : CMBA 20
This machine is designed to weld tip on core
drill by high frequency brazing. |
 |
Main Features
- Automatic feeding
of segments, transport, rotation of shank, feeding of silver solder,
enables good quality of brazing.
- Fully-automatic
control by PLC & monitor program.
- Main shaft of welding
table controlled by servo motor can be adjustable. Wide range of speed
control & adjustprecised position of welding.
- Free-programmable
segment pitch.
- Automatic self
diagnosis function.
* CHARACTERISTICS
- Brazing Range :
2" ~ 20" Core
- Full Auto cycle
- Simple operation
due to self centering jig to allow high precision of centericity
- Free-program segment
no.
- Easy to adjust
of segment side clearance - Special test program allows to check segment
clearance, fully execute rest part of operation.
- Brazing system
with segment feeding cartrige, alloy supply, high frequency induction
heating by time or temp.
- High precision
temp-measuring device with pyroscope
- Efficient cycle
time allows high performance.
- Error diagnosis
system allows operator to check machine very easily.
- Option : Chiller
for cooling(2RT) attached spec sheet.
| Technical
Data |
| Model No. |
CMBA 20 |
| POWER SUPPLY (Different voltages and frequencies on request)
|
220/380 V, 3 PHASES, 60 Hz |
| MAX. POWER CONSUMPTION |
19KW |
| COOLING WATER |
5 LITERS/MIN - 2~5 BAR |
| MAX COMPRESSED AIR CONSUMPTION |
25L/Min, 6Bar |
| BRAZING RANGE (CORE) |
2" ~ 20"(¥Õ50 ~ ¥Õ300) - 600L |
| ADJUSTABLE BRAZING TIME |
0 ~ 30 Seconds |
| SEGMENT DIMENSION |
W 3~10mm x L 20~25mm x H 3.2~7mm |
| MACHINE DIMENSION |
W 1,600mm x L 1,400mm x H 2,200mm |
| WEIGHT |
APPROX. 1,800 Kg |
|
Note: This Technical
data may be used only for guideline of production. DIEX Corp.
will reserve right to introduce any technical modification
to its own machines, also in contract acquired, which is irrevocable
decision are improvement, therefore, any datum given on the
catalogue & data sheet has only indicative value.
|
|
