Laser
welding bench
Model : LWB15/2
Laser welding bench to weld saw blade from 4 inch to 14 inch by semi auto way, using
CO2 Laser resonator. |
|
Main Features
- Two welding table increase production and efficiency of laser generator.
- Easy operation & high welding speed with Electronic jigs & special tools.
- Two welding table enable to adjust different welding conditions
table rotation speed adjust table moving distance adjust
table fix table rotation position adjust
- Main shaft of welding table is controlled by servo motor can adjust wide range of speed
control & adjust precise position of welding.
| Technical Data |
| Model No. |
LWB 15/2 |
| Power Supply |
220/380 Volt,3 phases,50/60 Hz |
| Max Power Consumption |
6 KVA |
| Max air consumption |
20 Litres/ Min. |
| Application range |
shank:4~14inch (segment:+/- Length 18.0-50.0mm, +/-height 5.0-25.0mm,+/- Thickness
1.2-4.5mm) |
| Table rotation speed |
4~24 RPM (Based on welding speed 6 meters/Min.) |
| Table feeding stroke |
Max. 160mm |
| production capacity |
Approx. 400Pcs/8 hours, 2 Operators |
| Pick & Place stroke |
Max. 80mm |
| Overall dimension |
Length 3,400mm x Width 1,000mm x Height 1,150mm |
| Weight |
Approx. 1,400 Kg |
| |
| Note : This Technical data may be used for
guideline of production.DIEX Corp.will reserve the right to introduce any technical
modification to its own machines, also in contract acquired, which is irrevocable decision
are improvement, therefore, any datum given on the catalogue & data sheet has only
indicative value. |
|
